| | | | | | | | | | | | | | | | 2-ch, 1 GHz, 1-2 GS/s
FPGA with 6-12 MB or 12-24 MB | | | | | | Firmware for Time-to-Digital Conversion and Peak Analysis | | | | | | Firmware for real-time
sampling and averaging | | | | | | Firmware for Sustained
Sequential Recording | | | | | | 2-ch, 500 MHz, 0.5-1 GS/s
FPGA with 6-12 MB or 12-24 MB | | | | | | Firmware for Time-to-Digital Conversion and Peak Analysis | | | | | | Firmware for real-time
sampling and averaging | | | | | | Firmware for Sustained
Sequential Recording | | | | | | | | | | |
 |
|
|
|
 |
|
|
|
|
| • | 2 channels | | • | 500 MHz bandwidth | | • | 0.5-1 GS/s sampling rate | | • | On-board reconfigurable Data Processing Unit (DPU) for real-time operations | | • | Processing memory from 6-12 MB up to 24-48 MB (optional)* | | • | Front-panel digital I/O connectors for real-time Data Processing Control (DPU Ctrl) | | • | Synchronous dual-channel mode with independent gain and offset on each channel | | • | Interleaved single-channel mode on either input, software selectable | | • | Fully-featured 50 Ω mezzanine front-end design with internal calibration and input protection | | • | Multipurpose I/O connectors for trigger, clock, reference and status control signals | | • | Continuous and Start/Stop external clock modes | | • | High-speed PCI bus transfers data to host PC at sustained rates up to 100 MB/s | | • | Device drivers for Windows 98/NT4.0/2000/XP, Wind River VxWorks and Linux | | • | Auto-install software with application code examples for C/C++, Visual Basic, National Instruments LabVIEW and LabWindows/CVI |
|
Note: Some items shown on this web site may not be listed
in the current Acqiris price list and may only be available upon
specific request. Please contact your local representative for
more information. |
|
|
|
|
