| | | | | | | | | | | | | | | | 2-ch, 1 GHz, 1-2 GS/s
FPGA with 6-12 MB or 12-24 MB | | | | | | Firmware for Time-to-Digital Conversion and Peak Analysis | | | | | | Firmware for real-time
sampling and averaging | | | | | | Firmware for Sustained
Sequential Recording | | | | | | 2-ch, 500 MHz, 0.5-1 GS/s
FPGA with 6-12 MB or 12-24 MB | | | | | | Firmware for Time-to-Digital Conversion and Peak Analysis | | | | | | Firmware for real-time
sampling and averaging | | | | | | Firmware for Sustained
Sequential Recording | | | | | | | | | | |
 |
|
|
|
 |
|
|
|
|
| • | Dual-bank memory system with on-board automatic switching allowing Sustained Sequential Recording (SSR) to host PC in sequence mode at sustained trigger and data rates ten times faster | | • | 1 GHz bandwidth with synchronous start-on-trigger dual-channel sampling at rates up to 1 GS/s (2 GS/s in single-channel mode) | | • | Minimum dead time between successive acquisitions allowing recording in sequence mode with sustained trigger rate of up to 100 kHz | | • | Smart data gating readout mode using user- or threshold-defined gates for effective data reduction and improved event transfer rate | | • | Efficient burst-style acquisitions with trigger rates within the burst of up to 500 kHz, for sequences of 1 μs-long waveforms at GS/s sample rates | | • | Continuous acquisition and transfer to host PC of digitized data at 100 MS/s sample rate with 99.995% live time in single-segment mode |
|
Note: Some items shown on this web site may not be listed
in the current Acqiris price list and may only be available upon
specific request. Please contact your local representative for
more information. |
|
|
|
|
